DURASTRIP ARS-40

Description:

DURASTRIP ARS-40 is an alkaline stripper concentrate designed to strip aqueous dry film photo resists. It can be used for tank stripping at ambient temperatures. DURASTRIP ARS-40 has a low odor level, exhibits minimal foaming, and leaves a bright, clean surface. It was designed for use with DYNACHEM GA, HG, and FL, ETERTEC 5600, 5700, and 7200; and DuPONT 9000, 9400, 4600, and PrintMaster films.

Benefits:

• Minimal odor.
• Fast stripping
• High load capacity
• Good film breakup at room temperature.

Properties:

Form:                                   Clear, water-white liquid
pH, concentrate:                 14
pH, @ 15% by volume:     12.5 to 12.8
Specific gravity:                 1.018
Weight/Gallon                    8.4947
Solubility, water:                Infinite
Flash point:                         >200°
Odor:                                    Mild, characteristic

Applications:

DURASTRIP ARS-40 was designed to strip aqueous resists and to leave a bright, clean, uniform surface ideal for optical inspection. ARS-40 is compatible with all feed and bleed systems.

Directions For Use:

Bath Make-up:                             10 to 20% by volume with water
Temperature:                                  125°F ± 5° F
Time:                                              30 seconds to 1 1/2 minutes depending on temperature, resist type, and exposure level.
Operation:                                     Static tank or spray

Equipment:

TANKS: polypropylene, PVC, PVDC, polypropylene

HEATERS: Titanium, Stainless Steel, Quartz, Teflon Coated, quartz

SPRAY MODULES: PVC, polypropylene, 316 s/s and titanium

RACKS: 316 Stainless Steel

Maintenance:

There are three (3) methods of maintaining DURASTRIP ARS-10: (1) conveyor-breakpoint, (2) pH control, or (3) by titration to maintain % by volume. A conveyorized spray system with an efficient mans of resist particle removal will generally have longer stripper life than one that does not. . The bath will not function below a pH of 9.0

Control:

Analytical procedure for percent by volume of stripper:

1. REAGENTS
   1. Hydrochloric acid, 1.0 Normal
   2. Phenolphthalien indicator solution.
2. APPARATUS
   1. Flask, 250 ml
   2. One 10 ml pipet
   3. One 50 ml buret
3. PROCEDURE
   1. Pipet 10 ml sample from bath into 250 ml flask
   2. Add 100 ml distilled water.
   3. Add 3 - 4 drops of indicator
   4. Titrate from a reddish pink to a very pale pink end point.
4. CALCULATIONS
   1. ml of titrate X Normality X 17 / 10 = percent of volume

    

Safety:

DURASTRIP ARS-40 is a strong alkaline solution and should be used in accordance with proper and appropriate safety practices. Goggles, face shield, apron, gloves, and any other appropriate safety equipment should be worn when mixing or otherwise handling this material. Proper exhaust to keep fumes out of the work area is a must.

In case of skin contact flush with copious quantities of fresh, cool water. In case of eye contact, flush immediately with cool fresh water for 15 minutes by the clock minimum and consult a physician immediately. In case of accidental ingestion, consult a physician immediately.

Disposal:

1. Lower the pH of the spent solution with sulfuric acid to pH of 1.5 to 2.0 to coagulate any dissolved resist.
2. Separate by decantation or filtration and dispose of the solid, according to local, state, and federal regulations.
3. Raise the pH with sodium hydroxide to 8 to 9.
4. Treat with sodium sulfide or thiocarbamate and filter for removal of metals such as copper, tin and lead. NOTE: If solution is allowed to become acidic, poisonous sulfide gas will form. Do not let pH drop below 7.
5. Check with local, state, and federal agencies for disposal of remaining liquid material.

Storage:

Keep containers sealed. Keep partial containers closed at all times. Store product away from sources of direct heat. Keep away from acidic materials and strong oxidizing agents.

Shelf Life:

DURASTRIP ARS-40 is guaranteed for (1) year from date of receipt in unopened containers.

Containers:

Five gallon pails and 55 gallon nonreturnable plastic drums.

Classification:

National Motor Freight Classification NO. 429200, Sub I
DOT Hazardous Material Description: Ehtanolamine Solution
Hazardous Class: Class 8
I.D Number: UN 2491, packing group III
Label Required: Corrosive

The information contained herein is based on our experience and is believed to be reliable. However, since methods and conditions of use of our products as described are beyond our control, both the product and instructions for its use are offered without warranty, expressed or implied. No information on this data should be construed as a recommendation by DURATECH INDUSTRIES, INC., to use any product in contravention of any patent right.